Ultra 4K HDMI Matrix Switch 8×8 HDM-988 with RS232 & RJ45

1 399,00$

Out of stock

Allows up to 8 HDMI sources to be distributed simultaneously to up to 8 displays

  1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
  2. 3D HDMI 1.4a video format support.
  3. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.
  4. Supports deep color up to 48-bit per pixel.
  5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
  6. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
  7. Full colorimetric including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
  8. Operates for TMDS clock frequencies up to 300MHz.
  • Input Ports: 8 x HDMI Female 
  • Output Ports: 8 x HDMI Female
Compare
Product Description

 1.Introduction

The 8×8 HDMI Matrix with EDID control connects eight HDMI sources to eight displays. This matrix provide eight HDMI outputs and each HDMI output is supporting 1080p Full HD up to 4K plus all 3D formats and supporting independent EDID control. It works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game consoles that connect to an HDMI display. Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP or by using the selection buttons on the front panel.

 

2.Features

l        HDMI V1.4 supports: 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

l        Deep Color support 48/36/30/24-bit

l        Supports LPCM 7.1CH, Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio transmission

l        Allows any source to be displayed on multiple displays at the same time

l        Allows any HDMI display to view any HDMI source at any time

l        8-input ports support independent EDID

l        Supports RS-232, remote control, on-panel control and TCP/IP Control

l        Front-panel LCD display for status feedback

Packaging & Shipping

 3.Package Contents

  •  8×8 HDMI Matrix———————————————————-    1pcs
  • 12V/3A DC power adapter———————————————-      1pcs
  • Operation Manual——————————————————–     1pcs
  • HDMI Matrix IR Remote————————————————      1pcs
  • Mounting ears————————————————————-     2pcs
  • RS232 cable—————————————————————-     1pcs

4. PANEL FUNCTIONS

4.1 Front Panel

 

1.LCD display:Show the status of input-output selection, EDID info and so on.

2.IR receiver window:Receive the IR from the remote control of 8×8.

3.POWER:Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in ‘Standby’ mode. 

4.LOCK:Press this button to lock all the buttons on the panel, press again to unlock. The red LED will illuminate when the button is locked, on the contrary, turn dark when unlock.

5.HDMI output selection button area:

  • HDMI output selection button 1 to 8:Press to select the output from 1 to 8.
  • All button for HDMI outputs:Press to select all of the outputs from 1 to 8.

6.HDMI input selection button area:

  • HDMI input selection button 1 to 8:Press to select the input from 1 to 8.

7.PTP button:Press to mirror all inputs and outputs (e.g. output 1 to input1, output 2 to input2 and so on).

8.EDID control area:

  • Menu button:Press to enter EDID set mode.
  • Enter button:Press to confirm and save the setting.
  • UP button:Press to change segment’s value.
  • Down button:Press to change segment’s value.

4.2 Rear Panel

 

 

1.PC CONTROL:Show the status of input-output selection, EDID info and so on.

TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45 terminated cable.

RS232: Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232 commands.

2.HDMI INPUT Area:Connect HDMI sources. LED 1-8 illuminate when the HDMI signal plug in corresponding input port with HDMI cable.

3.HDMI OUTPUT Area:Output for displays, AVR etc. LED A-H illuminate when the displays plug in corresponding output port with HDMI cable.

4.Power port:Use included DC adaptor to power the matrix switcher.

5.Remote Control

Power on /Standby:Press this button for power on the matrix or set it to standby mode.

  1. 1.        Input port selection area:Press these buttons to select input 1-8. Press forward/backward button will cycle from input 1-8.
  2. 2.        Output port selection area:Press these buttons to select output A-H, including ALL.

 

How to operate the Matrix Remote?

1. Power on and standby

Q.  How to power on and standby?

A.  Press Power on /Standbybutton and wait a while.

 

2. How to select Output and Input Port?

Q.  OUTPUT-X select INPUT-Y:

A.  Press OUTPUT-X (X means 1 to 8 of   outputs, including ALL)

Press INPUT-Y (Y means 1 to 8 of inputs)

Additional information

Manufacturer

Power Supply

color

Black

Be the first to review “Ultra 4K HDMI Matrix Switch 8×8 HDM-988 with RS232 & RJ45”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu