-
4X4 HDMI MATRIX OVER SINGLE CATE6 50M MATRIX
HDMI1.3, HDCP 1.1 and DVI1.0 compliant.
Supports HDMI 3D pass-through.
Supports resolutions from VGA~WUXGA and HD resolutions from 480i~1080p dependent upon the EDID settings.
Supports transmission distances up to 50m through CAT5e/6/7 cable.
Supports simultaneous HDMI and CAT outputs.
Supports wideband IR (20-60Khz) matrix system, IR transport channel can be forward or backward.
Supports RS-232, remote control, on-panel control and TCP/IP Control.
Supports smart EDID management.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby DigitaPlus and DTS-HD Master Audio transmission.0,00$ -
1X8 4Kx2K HDMI Splitter with Audio Extractor
Allows 1 HDMI Source to be Connected to 8 HDMI Displays Devices.
Compliant with HDMI1.4, HDCP 1.2 and DVI 1.0
Supports HDMI audio sampling rate up to 192 kHz
Supports Optical S/PDIF audio sampling rate up to 192 kHz
Supports TMDS clock frequency rate 300 MHz
Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
Supports 3.5mm phone jack for analog stereo audio output
Supports built-in EDID control
Supports 4K?2K resolution and 3D signal
Input Ports 1 ? HDMI (Female type)
Output Ports: 8x HDMI (Female type),1xOptical,1×3.5mm phone0,00$ -
HDMI Extender over single 50m UTP Cables with IR Control
Specification:
- Compliant with HDMI 1.3, HDCP 1.1 and DVI1.0 standards.
- Supports digital video formats in 1080p and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio.
- Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality.
- Supports HDMI1.4 with 3D, ARC function.
- Super IR control system, IR transport channel can be forward or backward.
- Support HDMI loop out.
0,00$ -
HDBaseT HDMI Extender over single 70m CAT6 (TCP/IP) with IR
Features:
- One pair as a full functional module, no need for setting.
- POE (Power Over Ethernet) function support, either TX or RX powered 12V@2.5A,another device will no need power form the DC jack. POE Power Consumption less than 10W.
- Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.
- UTP cable termination follows the standard of IEEE-568B.
- Transmission distance:70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit;4K x 2K@30Hz@24bit.
- HDMI V1.4 supported.
- HDCP compliant.
- Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
- Transfer Bidirectional Infrared control signal together with the HDMI signal.
0,00$ -
HDMI splitter 1×2 Lanberg with cable 20cm black
Specyfikacja techniczna
Produkt
ID1573928NazwaLanberg splitter HDMI – 2x HAMI (AD-0019-BK)KategoriaSwitche i splittery audio-wideoProducentLanbergEAN5901969408829Cena
Cena brutto15.89Gwarancja
Okres gwarancji24 miesiąceTyp gwarancjiProducentaInformacje podstawowe
Rodzaj urządzeniaSplitterKolorCzarnyTypHDMITechniczne
Złącza wejściowe1x HDMIZłącza wyjściowe2x HDMIMaksymalna rozdzielczośćBrak danychZasięg [m]0.20,00$ -
VGA + audio to HDMI Full HD 1080p Converter/Scaler HDV-M600
This product designed to convert analog RGBHV and stereo audio, upscale analog video to HDMI 1080p output.
- Built-in VGA input auto config function
- Built-in picture size zoom up/down adjust function
- Scale up VGA signal to 1080p HDMI output
- Input resolution automatic detection
- Support input resolution PC: 640*480,800*600,1024*768,1280*720,1280*768,…1920*1080
- Input port: VGA(D-SUB), Audio
- Output port: HDMI (audio+video)
12,00$ -
Audio Converter HDA-2M SPDIF Toslink digital audio (DAC, DAC) with optic to analog 2.0 stereo signal
This Digital to Analog optical Audio Converter is designed for both home and professional audio switching for connecting televisions, media players, digital tuners, the PS 3, the PS 4 on the optical or coaxial input to the active acoustics 2.0.
It converts coaxial or optical digital audio signals to analog L / R audio and is designed for connection to external devices such as an amplifier via standard RCA-connectors.
This converter is very small and easy to install.
12,90$ -
HDMI Switch 3×1 v1.4 4K/2K/HDTV HDCP 3D DTS-HD Dolby TrueHD
Allows you to manually switch between three HDMI sources to one device.
- Supports High Definition Resolution 4Kx2K@30,1080p and 3D.
- Supports 297 MHz/2.97 Gbps Per Channel Bandwidth.
- Supports 12 Bit per Channel Deep Color, 36 Bit Total.
- Supports Uncompressed Audio LPCM (Linear Pulse Code Modulation).
- Supports Compressed Audio DTS Digital, Dolby Digital (DTS-HD and Dolby True HD).
- Supports remote control
- Input port: HDMI*3, DC in.
- Output port: HDMI
20,50$ -
VGA+audio to HDMI HD Video Converter 1080P HDV330
Perfect solution for converting VGA signal with audio to HDMI Full HD signal
- Supports up to 1080P resolution
- With audio input
- HDMI version: 1080P / 1.3
- HDMI format: 720P,1080I,1080P
- VGA format: 640*480@60Hz/800*600@60Hz/1024*768@60Hz/1280*720@60Hz/1280*768@60Hz/1280*800@60Hz/1280*1024@60Hz/1360*768@60Hz/1600*1200@60Hz/1920*1080@60Hz
22,00$ -
Composite/S-video/VGA to VGA Converter HDV-200A
This product designed to convert composite or S-video signals to VGA(RGBHV) output
- Input sources selectable between Composite, S-video and VGA
- PAL/NTSC/SECAM TV system supported
- Output resolution adjustable for VGA, SVGA,XGA,SXGA,UXGA, etc.
- VGA to VGA bypass function supported
- Input port: Composite, S-video, VGA
- Output port: VGA(D-SUB)
25,00$ -
Digital SPDIF/Coaxial to Analog RCA Stereo Audio Converter HDA-2MB
Converts digital audio S/PDIF or Coaxial signals to analog L/R RCA signals and 3.5mm analog audio.
- Digital interpolation filter and digital to analog converter (DAC)
- Accepts uncompressed digital audio input
- 2-channel LPCM (Linear Pulse Code Modulation)
- 24-bit S/PDIF incoming bitstream on left and right channels
- Support data rate up to SPDIF 192kHz@24bits for Analog L/R conversion
- Input port: DC in, Optical (TOSlink), Coaxial
- Output port: L/R RCA, 3.5mm analog audio.
27,00$ -
VGA to AV+CVBS Video Converter HDV-625
VGA to Video scan converter is designed to convert a variety of computer images, from 640×480 up to 1920×1080, to interlaced NTSC or PAL video. It offers a composite output format. It is ideal for use in applications like video conference, home theater, business presentation, lecturing room or viewing PC image on TV.
- Automatically detects and converts the incoming PC images to NTSC, PAL.
- Support high resolution PC input up to SXGA(1920×1080@60Hz).
- Support resolution: 640×480 60 fps；800×600 60 fps, 75 fps；1024×768 60 fps, 75 fps ; 1280×720 60 fps；1280×768 60 fps, 75 fps；1280×1024 60 fps, 75 fps；1360×768 60 fps；1400×1050 60 fps；1440×900 60 fps；1680×1050 60 fps；1600×1200 60 fps；1920×1080 60 fps
28,30$
