-
4X4 HDMI MATRIX OVER SINGLE CATE6 50M MATRIX
HDMI1.3, HDCP 1.1 and DVI1.0 compliant.
Supports HDMI 3D pass-through.
Supports resolutions from VGA~WUXGA and HD resolutions from 480i~1080p dependent upon the EDID settings.
Supports transmission distances up to 50m through CAT5e/6/7 cable.
Supports simultaneous HDMI and CAT outputs.
Supports wideband IR (20-60Khz) matrix system, IR transport channel can be forward or backward.
Supports RS-232, remote control, on-panel control and TCP/IP Control.
Supports smart EDID management.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby DigitaPlus and DTS-HD Master Audio transmission.0,00$ -
1X8 4Kx2K HDMI Splitter with Audio Extractor
Allows 1 HDMI Source to be Connected to 8 HDMI Displays Devices.
Compliant with HDMI1.4, HDCP 1.2 and DVI 1.0
Supports HDMI audio sampling rate up to 192 kHz
Supports Optical S/PDIF audio sampling rate up to 192 kHz
Supports TMDS clock frequency rate 300 MHz
Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
Supports 3.5mm phone jack for analog stereo audio output
Supports built-in EDID control
Supports 4K?2K resolution and 3D signal
Input Ports 1 ? HDMI (Female type)
Output Ports: 8x HDMI (Female type),1xOptical,1×3.5mm phone0,00$ -
HDMI Extender over single 50m UTP Cables with IR Control
Specification:
- Compliant with HDMI 1.3, HDCP 1.1 and DVI1.0 standards.
- Supports digital video formats in 1080p and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio.
- Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality.
- Supports HDMI1.4 with 3D, ARC function.
- Super IR control system, IR transport channel can be forward or backward.
- Support HDMI loop out.
0,00$ -
HDBaseT HDMI Extender over single 70m CAT6 (TCP/IP) with IR
Features:
- One pair as a full functional module, no need for setting.
- POE (Power Over Ethernet) function support, either TX or RX powered 12V@2.5A,another device will no need power form the DC jack. POE Power Consumption less than 10W.
- Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.
- UTP cable termination follows the standard of IEEE-568B.
- Transmission distance:70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit;4K x 2K@30Hz@24bit.
- HDMI V1.4 supported.
- HDCP compliant.
- Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
- Transfer Bidirectional Infrared control signal together with the HDMI signal.
0,00$ -
HDMI splitter 1×2 Lanberg with cable 20cm black
Specyfikacja techniczna
Produkt
ID1573928NazwaLanberg splitter HDMI – 2x HAMI (AD-0019-BK)KategoriaSwitche i splittery audio-wideoProducentLanbergEAN5901969408829Cena
Cena brutto15.89Gwarancja
Okres gwarancji24 miesiąceTyp gwarancjiProducentaInformacje podstawowe
Rodzaj urządzeniaSplitterKolorCzarnyTypHDMITechniczne
Złącza wejściowe1x HDMIZłącza wyjściowe2x HDMIMaksymalna rozdzielczośćBrak danychZasięg [m]0.20,00$ -
Automatic HDMI splitter 1 x 2 HDMI, HD DVD, LCD
Description:
- Plug and play, stable signal transmission.
- High speed HDMI cable widely compatible with most kinds device.
- High efficiency, good reliability and lifelong lasting time, is useful and durable.
7,00$ -
HDMI repeater/amplifier > 30M
HDMI repeater/amplifier > 30M （Support 3D)
11,00$ -
Extend IR over HDMI cable
Extend IR over HDMI cable 30-50KHZ (Cable and connect productsNeed with CEC )
11,80$Extend IR over HDMI cable
11,80$ -
VGA + audio to HDMI Full HD 1080p Converter/Scaler HDV-M600
This product designed to convert analog RGBHV and stereo audio, upscale analog video to HDMI 1080p output.
- Built-in VGA input auto config function
- Built-in picture size zoom up/down adjust function
- Scale up VGA signal to 1080p HDMI output
- Input resolution automatic detection
- Support input resolution PC: 640*480,800*600,1024*768,1280*720,1280*768,…1920*1080
- Input port: VGA(D-SUB), Audio
- Output port: HDMI (audio+video)
12,00$ -
Audio Converter HDA-2M SPDIF Toslink digital audio (DAC, DAC) with optic to analog 2.0 stereo signal
This Digital to Analog optical Audio Converter is designed for both home and professional audio switching for connecting televisions, media players, digital tuners, the PS 3, the PS 4 on the optical or coaxial input to the active acoustics 2.0.
It converts coaxial or optical digital audio signals to analog L / R audio and is designed for connection to external devices such as an amplifier via standard RCA-connectors.
This converter is very small and easy to install.
12,90$ -
HDMI Switcher 3×1 with Extender IR and Romoter
HDMI Switcher 3×1 with Extender IR and Romoter （Support 3D)
14,00$ -
Digital to Analog Audio Converter 3,5 mm
Digital to Analog Audio Converter Optical Coaxial RCA Toslink Digital Audio to L/R Analog Audio converter adapter.
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or TOSLink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.17,25$
